Go e

Modbus TCP

Modbus TCP in der App aktivieren:
Internet > Advanced Settings > Modbus > Enable Modbus TCP Access on Port 502. Requires Reboot to take effect.

Softwareversion

Byte-order ist vor Version 60.4 vertauscht --> Softwareversion muss zwingend auf 60.4 oder höher sein.

Lokale API zur Konfigurierung des Modbus TCP interfaces

Using the http API to enable and verify the Modbus interface

The chargers provide api keys to configure and verify the modbus interface. These api keys can be used with the http api.

Example: http://192.168.0.77/api/set?men=true api key description datatype R?W? Category men modbus slave enabled bool R/W Config msp modbus slave port (requires reboot) uint16 R/W Config msb modbus slave swap bytes bool R/W Config msr modbus slave swap registers bool R/W Config mro modbus slave read operations size_t R Status mwo modbus slave write operations size_t R Status